Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start User Manual
Page 352
Advertising
352
Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
Appendix G
Controller, Network, and Device Configuration Without the DMAT Wizard
Import and Configure SMC-50 Soft Starter Device Modules
Follow these steps to add preconfigured SMC-50 soft-starter device logic modules to your Logix Designer
project.
1.
Expand the Tasks folder in your Controller Organizer and right-click the Main Task folder.
2.
Choose Import Program.
3.
Navigate to the 4-Controller Logic folder within the toolkit’s files folder and open the 03_Device Modules
folder.
Your personal computer’s harddrive path is
C:\Program Files\RA_Simplification\DMAT\B-Files\4-Controller Logic.
Advertising
This manual is related to the following products: