Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start - Manual (Page 152)

152 Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
Chapter 6 System Commissioning
Configure Runtime (Target) Communication
The target tab displays the offline configuration from the perspective of the device that will be running the
application and comprises the topology that will be loaded into a PanelView Plus or PanelView Plus CE
terminal.
Follow these steps to copy the configuration from Design time to Runtime.
1. Click Copy from Design to Runtime.
This RSLinx Enterprise dialog box opens.
2. Click Yes.
3. Click Verify to make sure communication is
setup correctly.
The Shortcut Verifier dialog box opens.
4. Verify that the path to the Design device and
the Runtime device are assigned.
5. Click Close.
6. Click OK to save the configuration.