Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start - Manual (Page 342)

342 Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
Appendix G Controller, Network, and Device Configuration Without the DMAT Wizard
5. Click Import.
The Import Configuration dialog box opens.
6. Enter the desired name for your initial device in Final Name field.
For the Widg-O-matic application example, the Final Name is P06_Conveyor_Drive.
7. Click Tags within the Import Content organizer.
The Configure Tag References dialog box opens.