Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start User Manual
Page 29
Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
29
Initial System Configuration Using the DMAT Wizard
Chapter 1
The Open or Create a Project dialog box opens.
3.
Click Create New to initiate a new project.
Another configuration information dialog appears
explaining machine, application, and drive
configuration.
4.
Read configuration information dialog box and
click OK to continue.
5.
The New Project Wizard dialog box opens.
a. Enter Project Name.
b. Enter Project Description (optional).
c. Click Next.
6.
From the Number of Machines pull-down menu, choose
the number of machines in your project.
A machine, as defined by the wizard, is a control system
using a single controller and housed in a single enclosure.
7.
Click Next.
8.
Click the Machine Name edit field and enter the desired
machine name.
For the Widg-O-matic example, the machine name
entered is WidgOmatic.
9.
Click the Power Voltage Class edit field and from the
pull-down menu choose the power voltage for your
system.
For the Widg-O-matic example, the voltage level is 400/
460V AC.
10.
Click the Application Qty edit field and from the pull-
down menu choose the number of applications you are
configuring.
For the Widg-O-matic example, the quantity is set to 2.
11.
Click Next.
The WidgoMatic machine displays with the number of
applications specified in