Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start - Manual (Page 223)

Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013 223
Logic Module Customization Appendix B
State Display Tag Modifications
Each instance of any MachineSTATE_AOI instruction contains an embedded string tag that sets the
Machine.StateDisplay tag following a state change. The Machine.StateDisplay tag is referenced by the HMI to
display the current or active machine state.
Follow these steps to modify the embedded string tag.
1. Right-click the AOI tag name and choose Open Instruction Logic.
2. Navigate to rung 5, right-click State_Name, and choose Monitor “State_Name”.