Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start User Manual
Page 121
Advertising
Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
121
FactoryTalk View ME Configuration
Chapter 5
5.
Select the parameter file you desire to add.
For this example, Startup_Parameter.par was selected to support the PVP1000_Startup_Faceplate added
earlier.
6.
Click Open.
The selected parameter is added to the Parameter folder.
7.
for each parameter file required for your application.
Advertising
This manual is related to the following products: