Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start User Manual
Page 338
338
Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
Appendix G
Controller, Network, and Device Configuration Without the DMAT Wizard
6.
Enter the desired name for your initial Device in Final Name field.
For the Widg-O-matic application example, P04_Gantry_X_Drive is the Final Name.
7.
Click Tags within the Import Content organizer.
The Configure Tag References dialog box opens.
8.
Replace Final Tag Names with associated axis, machine, drive, and motion group names that you have
already configured.
a. Replace _AxisName of _AxisName, _AxisName_Ctrl, and AxisName_FP tags with the name of the axis
for your drive.
b. Replace _MachineName of _MachineName tag with the machine name of your project.
c. Replace _ModuleName of _ModuleName tag with the device name of your drive.
d. Replace _MotionGroupName of _MotionGroupName tag with the motion group name within your
project.