Opening screen, Function select: configuration, 4 opening screen – Comtech EF Data SDM-300A User Manual
Page 101: 1 function select: configuration
SDM-300A Satellite Modem
Revision 6
Front Panel Operation
MN/SDM300A.IOM
5–7
5.4 Opening
Screen
This screen is displayed whenever power is first applied to the unit.
SDM-300A CUSTOM
VER: X.X.X
Press [
→] key to go to the any of the following FUNCTION SELECT menu screens
• CONFIGURATION
• MONITOR
• FAULTS/ALARMS
• STORED FLTS/ALMS
• UTILITY
Note: At any time, pressing CLEAR will return to a main heading.
5.4.1
FUNCTION SELECT: CONFIGURATION
FUNCTION SELECT
CONFIGURATION
Press [
→] key to go to any of the following sub-menus. Press <ENTER> to review or edit the
menu.
CONFIGURATION MODULATOR
Permits the user to fully configure the modulator portion of the
modem.
CONFIGURATION DEMODULATOR
Permits the user to fully configure the demodulator portion of
the modem.
CONFIGURATION INTERFACE
Permits the user to fully configure the interface portion of the
modem.
CONFIGURATION SAVE
Permits the user to fully configure the save portion of the
modem
CONFIGURATION RECALL
Permits the user to fully configure the recall portion of the
modem