A.7 interface configuration commands – Comtech EF Data SDM-300A User Manual
Page 403
SDM-300A Satellite Modem
Revision 6
Remote Control Operation
MN/SLM3650.IOM
A–11
RX 8PSK 2/3
IESS-310
Operation
Command:
Response:
Status:
Response:
<add/R310_xxx'cr'
>add/R310_xxx'cr''lf']
<add/R310_'cr'
>add/R310_xxx'cr''lf']
Where: xxx = ON or OFF.
RX IESS-
315 Turbo
Mode
Command:
Response:
Status:
Response:
<add/R315_xxx’cr’
>add/R315_xxx’cr’’lf’’]
<add/R315_’cr’
>add/R315_xxx’cr’’lf’]
Where: xxx = On or Off
Note: Turbo only.
A.7 Interface Configuration Commands
Interface
Transmit
Overhead Type
Command:
Response:
Status:
Response:
<add/ITOT_xxxxx'cr'
>add/ITOT_xxxxx'cr''lf']
<add/ITOT_'cr'
>add/ITOT_xxxxx'cr''lf']
Where: xxxxx = NONE, IDR, IBS, DI, ASYNC,
AUPC, FLEX, or VSAT-IBS.
Interface Receive
Overhead Type
Command:
Response:
Status:
Response:
<add/IROT_xxxxx'cr'
>add/IROT_xxxxx'cr''lf']
<add/IROT_'cr'
>add/IROT_xxxxx'cr''lf']
Where: xxxxx = NONE, IDR, IBS, DI, ASYNC,
AUPC, FLEX, or VSAT-IBS.
TX Driver Type
Command:
Response:
Status:
Response:
<add/TXDR_xxxxx'cr'
>add/TXDR_xxxxx'cr''lf']
<add/TXDR_'cr'
>add/TXDR_xxxxx'cr''lf']
Where: xxxxx = G703, V35, RS422, or RS232.
RX Driver Type
Command:
Response:
Status:
Response:
<add/RXDR_xxxxx'cr'
>add/RXDR_xxxxx'cr''lf']
<add/RXDR_'cr'
>add/RXDR_xxxxx'cr''lf']
Where: xxxxx = G703, V35, RS422, or RS232.
Transmit Clock
Command:
Response:
Status:
Response:
<add/TC_xxx'cr'
>add/TC_xxx'cr''lf']
<add/TC_'cr'
>add/TC_xxx'cr''lf']
Where: xxx = INT (internal SCT clock), EXT
(external TX terrestrial clock), REF (external
clock-reference frequency).