Comtech EF Data SDM-300A - Manual (Page 145)

SDM-300A Satellite Modem Revision 6
Front Panel Operation MN/SDM300A.IOM
5–51
FUNCTION SELECT: CONFIGURATION: FLEX MUX:
TX CHAN #3 MODE
TX CHAN #3 MODE
SYNC RS422
TX CHANNEL 3 MODE: ASYNC RS232, SYNC RS232, ASYNC RS422, SYNC RS422,
AUPC, or DISABLED
Async communications are fixed at 10 bits per word.
AUPC can be enabled only on either Tributary 3 or Tributary 4. The AUPC channel operates at
600 bps.
FUNCTION SELECT: CONFIGURATION: FLEX MUX:
TX CHAN #3 DATA RATE
TX CHAN #3 DR
64.0 Kbps
SYNC RS422: 0.6 to 4000.0 kbps
All other modes: 0.6 to 64.0 kbps
Channels 3 and 4 data rates are in steps of 100 bps.
Note: DR command is not displayed if AUPC or DISABLED were selected for MODE.
FUNCTION SELECT: CONFIGURATION: FLEX MUX:
TX CHAN #3 PHASE
TX CHAN #3 PHASE
CLK:NRM DATA:NRM
TX CHANNEL 3 PHASE: NRM or INV (for both clock and data phase)
Note: PHASE command is not displayed if AUPC or DISABLED were selected for MODE.