Function select: utility: system:year display, Function select: utility: system: test mode status – Comtech EF Data SDM-300A User Manual
Page 188
SDM-300A Satellite Modem
Revision 6
Front Panel Operation
MN/SDM300A.IOM
5–94
FUNCTION SELECT: UTILITY: SYSTEM:YEAR DISPLAY
YEAR DISPLAY
2 - DIGIT
2 - Digits or 4 - Digits
Displays the year in 2- or 4-digit format. To change the remote address, press [ENTER]. Press [
↑]
or [
↓] to make the selection. Press [ENTER] to execute the change.
FUNCTION SELECT: UTILITY: SYSTEM: TEST MODE STATUS
TEST MODE STATUS
_ _ _ _ _ _ _ _
Test mode status indicator. The following modem test modes are listed and display a “+” when
a test mode is active:
• RS CORR OFF
• INTRFC LOOP BACK
(requires Overhead card)
• B-BAND LOOP BACK
• RF LOOP BACK
• IF LOOP BACK
• CARRIER MODE
• RX 2047 Pattern
(requires Overhead card)
• TX 2047 Pattern
(requires Overhead card)
To view the test modes, press [ENTER]. Press [
←] or [→] to view the selections.