Comtech EF Data SDM-300A User Manual
Page 130
SDM-300A Satellite Modem
Revision 6
Front Panel Operation
MN/SDM300A.IOM
5–36
FUNCTION SELECT: CONFIGURATION: INTERFACE:DROP
CHANNEL ASSIGNMENTS (CONDITIONAL)
DROP CHANNEL
ASSIGNMENTS
IMPORTANT
Conditional: The menu is only available when the optional D&I have
been selected for Modem Type in the Utility menu and the Overhead
card is installed.
Program the drop channels into one of the following time slots:
DROP SAT CHANNEL TERR
For T1, T1_ESF, T1_S, T1_ESF_S
DROP SAT T-SLOT TERR
For all other formats
Upon entry, drop channel 1 and the current time slot are displayed. Press [
↑] or [↓] to select the
drop channel to be programmed.
Press [ENTER] to begin programming. Press [
↑] or [↓] to select the time slot for each available
drop channel by increasing or decreasing the digit at the flashing cursor. Press [ENTER] to
execute the change.
DROP SAT -----> 1
CHANNEL TERR -> 1
DROP SAT -----> 1
T-SLOT TERR -> 1