Comtech EF Data SDM-300A - Manual (Page 460)

SDM-300A Satellite Modem Revision 6
Remote Control Operation MN/SLM3650.IOM
A–68
State Of
Product
(Remove
setup
information) Command:
Response:
<add/SOP_'cr'
>add/SOP_'cr'
add'cr' Product Address:
abc'cr' Data Format:
rrrrr bps'cr' Baud Rate:
<var-string1>'cr' COMM Type:
<var-string2>'cr''lf']
Where: add =- Address (1 to 255)
abc = Explained below:
a = Number of data bits (7).
b = Parity type (O, E, N).
c = Number of stop bits (2).
rrrrr = baud rate ("150", "300", "600", "1200", "2400", "4800",
"9600", "14.4K", "19.2K").
communication hardware type "RS-485, 2 wire", "RS-485,
4 wire", "RS-232".
<var_string2> = Variable length strings explaining the intention
of the product. "Under normal system operation", "REFLASH
of BULK firmware required", "REFLASH of M&C firmware
required".