Function select: utility: interface:cts delay – Comtech EF Data SDM-300A User Manual
Page 185
Advertising
SDM-300A Satellite Modem
Revision 6
Front Panel Operation
MN/SDM300A.IOM
5–91
IMPORTANT
Conditional: This selection is available only when Modem Type = IDR
is enabled and the Overhead card is installed.
FUNCTION SELECT: UTILITY: INTERFACE:IDR RX ESC TYPE
(CONDITIONAL)
IDR RX ESC TYPE
2-32K AUDIO
2-32K AUDIO or 64K DATA
IMPORTANT
Conditional: This selection is available only when Modem Type = IDR
is enabled and the Overhead card is installed.
FUNCTION SELECT: UTILITY: INTERFACE:CTS DELAY
CTS DELAY
0 SECONDS
Range: 0 to 60 seconds
Sets the delay in seconds for the Clear To Send (CTS) signal output.
Advertising