Comtech EF Data SDM-300A - Manual (Page 120)

SDM-300A Satellite Modem Revision 6
Front Panel Operation MN/SDM300A.IOM
5–26
FUNCTION SELECT: CONFIGURATION: INTERFACE:
BUFFER CENTER
BUFFER CENTER
YES / NO
This command is used to center the buffer. Choose YES and press [ENTER] twice to center the
buffer.
Press [ENTER} twice to center the buffer.
FUNCTION SELECT: CONFIGURATION: INTERFACE:
RX CLOCK PHASE
RX CLOCK PHASE
NORMAL
Sets the Receive Clock Phase in either the Normal or Invert position.
Upon entry, the current status of the RX Clock is displayed. Press [
↑] or [↓] to make the
selection. Press [ENTER] to execute the change.