Comtech EF Data SDM-300A - Manual (Page 411)

SDM-300A Satellite Modem Revision 6
Remote Control Operation MN/SLM3650.IOM
A–19
Receive Data
Phase
Command:
Response:
Status:
Response: <add/RDP_xxxx'cr'
>add/RDP_xxxx'cr''lf']
<add/RDP_'cr'
>add/RDP_xxxx'cr''lf']
Where: xxxx = NRM (normal data phasing),
INV (inverted data phasing).
CTS Delay Time Command:
Response:
Status:
Response: <add/CTSD_xx'cr'
>add/CTSD_xx'cr''lf']
<add/CTSD_'cr'
>add/CTSD_xx'cr''lf']
Where: xx = 0 to 60 (number of seconds).
IDR Transmit
ESC Type Command:
Response:
Status:
Response: <add/TET_xxxxx'cr'
>add/TET_xxxxx'cr''lf']
<add/TET_'cr'
>add/TET_xxxxx'cr''lf']
Where: xxxxx = DATA (64K DATA) or AUDIO
(2x32K AUDIO).
Note: TX IDR Overhead only.
IDR Receive ESC
Type Command:
Response:
Status:
Response: <add/RET_xxxxx'cr'
>add/RET_xxxxx'cr''lf']
<add/RET_'cr'
>add/RET_xxxxx'cr''lf']
Where: xxxxx = DATA (64K DATA) or AUDIO
(2x32K AUDIO).
Note: RX IDR Overhead only.