Function select: utility: demodulator – Comtech EF Data SDM-300A User Manual
Page 174
SDM-300A Satellite Modem
Revision 6
Front Panel Operation
MN/SDM300A.IOM
5–80
5.4.6.4
FUNCTION SELECT: UTILITY: DEMODULATOR
UTILITY
DEMODULATOR
Select information to view using the [
←] [→] arrow keys, then press ENTER.
FUNCTION SELECT: UTILITY: DEMODULATOR: ASSIGN RECEIVE
FILTERS
RX-A QPSK 1/2
64.000 Kbps
Assign Receive Filters:
A, B, C, D or V
This menu allows the user to set values for the pre-assigned filter selection to be displayed in
the configuration menu.
Select one of four pre-defined receive code/data rate combinations (A, B, C, or D):
RX-A QPSK 1/2
64.000 Kbps
RX-B QPSK 1/2
128.000 Kbps
RX-C QPSK 1/2
256.000 Kbps
RX-D QPSK 1/2
512.000 Kbps
or:
Select the variable rate selection (V).
RX-V QPSK 1/2
38.400 Kbps
Change the modulation type, code rate , or data rate values as follows: