Comtech EF Data SDM-300A - Manual (Page 402)

SDM-300A Satellite Modem Revision 6
Remote Control Operation MN/SLM3650.IOM
A–10
Bit Error
Rate
Threshold Command:
Response:
Status:
Response: <add/BERT_xxxx'cr'
>add/BERT_xxxx'cr''lf']
<add/BERT_'cr'
>add/BERT_xxxx'cr''lf']
Where: xxxx = NONE, or 1E-n, where n = 3, 4, 5, 6, 7, or 8
(exponent of threshold).
Demodulator
Type Command:
Response:
Status:
Response: <add/DT_xxxx'cr'
>add/DT_xxxx'cr''lf']
<add/DT_xxxx'cr'
>add/DT_xxxx'cr''lf']
Where: xxxx = INTL (INTELSAT OPEN NETWORK), EFD
(EF DATA CLOSED NETWORK), CSC (COMSTREAM
CLOSED NETWORK), FDC (FAIRCHILD CLOSED
NETWORK).
Demodulator
Decoder
Type Command:
Response:
Status:
Response: <add/DDT_xxx'cr'
>add/DDT_xxx'cr''lf']
<add/DDT_xxx'cr'
>add/DDT_xxx'cr''lf']
Where: xxx = VIT (K-7 VITERBI ENCODER), SEQ
(SEQUENTIAL ENCODER), TUR (TURBO DECODER).
Demodulator
Spectrum
Rotation Command:
Response:
Status:
Response: <add/DSR_xxx'cr'
>add/DSR_xxx'cr''lf']
<add/DSR_'cr'
>add/DSR_xxx'cr''lf']
Where: xxx = NRM (normal spectrum), INV (inverted
spectrum).
Reed-
Solomon
Decoder
Enable Command:
Response:
Status:
Response: <add/RSDE_xxx'cr'
>add/RSDE_xxx'cr'lf']
<add/RSDE_'cr'
>add/RSDE_xxx'cr'lf']
Where: xxx = ON, OFF, or CORR_OFF.
Note: Always Off in Turbo mode.
Receive
BPSK Data
Ordering Command:
Response:
Status:
Response: <add/RDA_xxx'cr'
>add/RDA_xxx'cr''lf']
<add/RDA_xxx'cr'
>add/RDA_xxx'cr''lf']
Where: xxx = NRM (STANDARD), INV (NON-STANDARD).
Reed-
Solomon
Interleave
Value Command:
Response:
Status:
Response: <add/RRSI_xx'cr'
>add/RRSI_xx'cr''lf']
<add/RRSI_'cr'
>add/RRSI_xx'cr''lf']
Where: xx = 4, 8, or 16.