Comtech EF Data SDM-300A - Manual (Page 147)

SDM-300A Satellite Modem Revision 6
Front Panel Operation MN/SDM300A.IOM
5–53
FUNCTION SELECT: CONFIGURATION: FLEX MUX:
RX CHAN #1 MODE
RX CHAN #1 MODE
D&I ENABLED
RECEIVE CHANNEL 1 MODE: D&I ENABLED, T1/E1 ENABLED, or DISABLED
Normal D&I/G.703 menus are operational.
FUNCTION SELECT: CONFIGURATION: FLEX MUX:
RX CHAN #1 DATA RATE
RX CHAN #1 DR
64.0 Kbps
RECEIVE CHANNEL 1 DATA RATE: 1544.0 Kbps or 2048.0 Kbps for bypass,
N * 64.0 Kbps for D&I
Note: DR command is not displayed if DISABLED was selected for MODE.
FUNCTION SELECT: CONFIGURATION: FLEX MUX:
RX CHAN #2 MODE
RX CHAN #2 MODE
ADPCM DISABLED
RECEIVE CHANNEL 2 MODE: ADPCM ENABLED or ADPCM DISABLED
Allows ADPCM 32Kbps operation.
FUNCTION SELECT: CONFIGURATION: FLEX MUX:
RX CHAN #3 MODE
RX CHAN #3 MODE
SYNC RS422