Function select: utility:modulator – Comtech EF Data SDM-300A User Manual
Page 169
![background image](/files/778893/content/doc169.png)
SDM-300A Satellite Modem
Revision 6
Front Panel Operation
MN/SDM300A.IOM
5–75
5.4.6.3
FUNCTION SELECT: UTILITY:MODULATOR
UTILITY
MODULATOR
Select information to view using the [
←] [→] arrow keys, then press ENTER.
FUNCTION SELECT: UTILITY: MODULATOR:
ASSIGN TRANSMIT FILTERS
TX-A QPSK 1/2
64.000 Kbps
Assign Transmit Filters:
A, B, C, D or V
This menu allows the user to set values for the pre-assigned filter selection to be displayed in
the configuration menu.
Select one of four pre-defined transmitter code/data rate combinations (A, B, C, or D):
TX-A QPSK 1/2
64.000 Kbps
TX-B QPSK 1/2
128.000 Kbps
TX-C QPSK 1/2
256.000 Kbps
TX-D QPSK 1/2
512.000 Kbps
or:
Select the variable rate selection (V).
TX-V QPSK 1/2
38.400 Kbps
Change the modulation type, code rate, or data rate value as follows: