Comtech EF Data SDM-300A - Manual (Page 429)

SDM-300A Satellite Modem Revision 6
Remote Control Operation MN/SLM3650.IOM
A–37
MTDP_5_yyy'cr' (Note 7)
MTMD_5_yyyyy'cr' (Note 7)
MTAF_5_yyy'cr' (Note 7)
MTDR_6_yyyyyy'cr' (Note 7)
MTIT_6_yyyyy'cr' (Note 7)
MTCP_6_yyy'cr' (Note 7)
MTDP_6_yyy'cr' (Note 7)
MTMD_6_yyyyy'cr' (Note 7)
MTAF_6_yyy'cr' (Note 7)
MTDR_7_yyyyyy'cr' (Note 7)
MTIT_7_yyyyy'cr' (Note 7)
MTCP_7_yyy'cr' (Note 7)
MTDP_7_yyy'cr' (Note 7)
MTMD_7_yyyyy'cr' (Note 7)
MTAF_7_yyy'cr' (Note 7)
MTDR_8_yyyyyy'cr' (Note 7)
MTIT_8_yyyyy'cr' (Note 7)
MTCP_8_yyy'cr' (Note 7)
MTDP_8_yyy'cr' (Note 7)
MTMD_8_yyyyy'cr' (Note 7)
MTAF_8_yyy'cr' (Note 7)
TCEN_1_xxxx'cr' (Note 8)
TCDR_1_xxxx.x'cr' (Note 9)
TCEN_2_xxx'cr' (Note 8)
TCEN_3_xxxx'cr' (Note 8)
TCDR_3_xxxx.x'cr' (Note 10)
TCCP_3_yyy'cr' (Note 10)
TCDP_3_yyy'cr' (Note 10)
TCEN_4_xxxx'cr' (Note 8)
TCDR_4_xxxx.x'cr' (Note 11)
TCCP_4_yyy'cr' (Note 11)
TCDP_4_yyy'cr' (Note 11)
RCEN_1_xxxx'cr' (Note 8)
RCDR_1_xxxx.x'cr' (Note 12)
RCEN_2_xxx'cr' (Note 8)
RCEN_3_xxxx'cr' (Note 8)
RCDR_3_xxxx.x'cr' (Note 13)
RCCP_3_yyy'cr' (Note 13)
RCDP_3_yyy'cr' (Note 13)
RCEN_4_xxxx'cr' (Note 8)
RCDR_4_xxxx.x'cr' (Note 14)
RCCP_4_yyy'cr' (Note 14)
RCDP_4_yyy'cr''lf'] (Note 14)
Mux Tributary #5 Data Phase
Mux Tributary #5 Mode
Mux Tributary #5 Async Mode
Mux Tributary #6 Data Rate & Enable
Mux Tributary #6 Interface Type
Mux Tributary #6 Clock Phase
Mux Tributary #6 Data Phase
Mux Tributary #6 Mode
Mux Tributary #6 Async Mode
Mux Tributary #7 Data Rate & Enable
Mux Tributary #7 Interface Type
Mux Tributary #7 Clock Phase
Mux Tributary #7 Data Phase
Mux Tributary #7 Mode
Mux Tributary #7 Async Mode
Mux Tributary #8 Data Rate & Enable
Mux Tributary #8 Interface Type
Mux Tributary #8 Clock Phase
Mux Tributary #8 Data Phase
Mux Tributary #8 Mode
Mux Tributary #8 Async Mode
Flex Mux TX Channel #1 Enable
Flex Mux TX Channel #1 Data Rate
Flex Mux TX Channel #2 Enable
Flex Mux TX Channel #3 Enable
Flex Mux TX Channel #3 Data Rate
Flex Mux TX Channel #3 Clock Phase
Flex Mux TX Channel #3 Data Phase
Flex Mux TX Channel #4 Enable
Flex Mux TX Channel #4 Data Rate
Flex Mux TX Channel #4 Clock Phase
Flex Mux TX Channel #4 Data Phase
Flex Mux RX Channel #1 Enable
Flex Mux RX Channel #1 Data Rate
Flex Mux RX Channel #2 Enable
Flex Mux RX Channel #3 Enable
Flex Mux RX Channel #3 Data Rate
Flex Mux RX Channel #3 Clock Phase
Flex Mux RX Channel #3 Data Phase
Flex Mux RX Channel #4 Enable
Flex Mux RX Channel #4 Data Rate
Flex Mux RX Channel #4 Clock Phase
Flex Mux RX Channel #4 Data Phase
The Interface configuration status command causes a block of
data to be returned by the addressed MODEM. The block reflects