Comtech EF Data SDM-300A - Manual (Page 134)

SDM-300A Satellite Modem Revision 6
Front Panel Operation MN/SDM300A.IOM
5–40
FUNCTION SELECT: CONFIGURATION:
INTERFACE:ASYNC TX STOP (CONDITIONAL)
ASYNC TX STOP
2 BITS
IMPORTANT
Conditional: The menu is only available when the Modem Type =
ASYNC and requires that the Overhead card is installed.
Programs the ASYNC Overhead Transmit Stop Bits: 1 or 2.
Upon entry, the current status of the ASYNC TX stop bits is displayed. Press [
↑] or [↓] to make
the selection. Press [ENTER] to execute the change.
FUNCTION SELECT: CONFIGURATION: INTERFACE: ASYNC RX
STOP (CONDITIONAL)
ASYNC RX STOP
2 BITS
IMPORTANT
Conditional: The menu is only available when the Modem Type =
ASYNC and requires that the Overhead card is installed.
Programs the ASYNC Overhead Receive Stop Bits: 1 or 2.
Upon entry, the current status of the ASYNC RX stop bits make the selection. Press [ENTER]
to execute the change.