Comtech EF Data SDM-300A - Manual (Page 465)

i-1
Index
50-Pin Connector Assignments, 15-8
8-Channel Multiplexer, 14-1
8-Channel Multiplexer 100-Pin Connector (J10), 14-5
8-Channel Multiplexer Specifications, 14-4
8-PSK Performance with Noise and with/without
Reed-Solomon,
19-20
A
Acquisition Time, 19-22
AGC Output, 21-23Alarms Connector and Pinouts (J10), 4-15
Asymmetrical Loop Timing, 12-1
ASYNC, 11-7
ASYNC/AUPC Modem Defaults, 11-24
ASYNC/AUPC Operation, 6-5
ASYNC Channel EIA-485 2-and 4-Wire Operation, 11-10
ASYNC Data Interfaces, 11-7
ASYNC Remote Operation, 11-12
Asynchronous Interface/AUPC, 11-1
AUPC, 11-4
AUPC - Between Two Modems, 11-5
Automatic Uplink Power Control (AUPC), A-22
Auxiliary 1 Connector and Pinouts (J9), 4-14
Available Interfaces, 2-13
B
Backward Alarm, 10-20
Backward Alarm Theory and Connections, 2-15
Baseband Loopback Operation, 11-9
BER Performance Specifications, 19-16
BER Threshold, 19-21
Bits to Seconds, 8-6
BPSK BIT Ordering, 19-8, 19-14
Breakout Panels, 1-9
Buffer Operation, 11-8
Buffer Size, 8-4
Buffering, 8-1
Bulk Consolidated Status Faults, A-60
C
Channel Spacing/Adjacent Carrier Performance, 19-16
Closed Network, 2-14
Closed Network Modes, 9-5
Clocking Options, 7-1
Commands/Responses Format, A-3
Compatibility, 1-9
Comparison of all TPC Modes, 9-8
Comtech EF Data Part Numbers, 1-11
Converting Between Bits and Seconds, 8-6
Custom Modem Defaults, 5-110
Custom Operation, 6-7
D
D&I Framing, 10-24
D&I Framing Formats, 10-20
D&I G.703 Master/Master, 7-7
D&I Modem Defaults, 10-23
D&I Operation, 6-4
D&I Primary Data Interface, 10-24
D&I Specification, 10-14
Data Interference, 10-18
Data I/O Interface Connector (J8), 3-17, 4-6
Data I/O Interface Connector (J8) Installation, 3-18
Data I/O Connector (J8) Removal, 3-17
Deinterleaver (Reed-Solomon Codec), 19-15
Demodulation and FEC Decoding Types, 19-13
Demodulator Checkout, 18-6
Demodulator Configuration Commands, A-8
Demodulator Configuration Status, A-32
Demodulator IF Input Shape,19-16