Comtech EF Data SDM-300A - Manual (Page 166)

SDM-300A Satellite Modem Revision 6
Front Panel Operation MN/SDM300A.IOM
5–72
FUNCTION SELECT: REMOTE AUPC:MONITOR (CONDITIONAL)
REMOTE AUPC
MONITOR
IMPORTANT
Conditional: This is only available when the ASYNC / AUPC
overhead option is selected from the Modem Type menu, located
under the Utility: Modem Type menu.
Requires either the Overhead card installed with the ASYNC/AUPC
option or the Reed-Solomon card installedwith AUPC option.
FUNCTION SELECT: REMOTE AUPC: MONITOR: 2047 ERRORS
2047 ERRORS
n.n E-e
IMPORTANT
Conditional: This is only available when the ASYNC / AUPC
overhead option is selected from the Modem Type menu, located
under the Utility: Modem Type menu.
Requires either the Overhead card installed with the ASYNC/AUPC
option or the Reed-Solomon card with AUPC option.
Receive 2047 BER. This is a monitor point that displays the current Receive 2047 BER at the
far end of the link. Modems at both ends of the link must be locked. This program is for control
or displays last known status.
If no data is available, “No Data” is displayed.