Fluke Biomedical medSim 300B - Manual (Page 43)

Operation
Operating the medSim 300B
3
3-15
To set R-wave amplitude or width parameters, follow step menu instructions as presented
earlier in this chapter.
Upon leaving R-wave detection, the ECG amplitude is equal to the adjusted R-wave
amplitude.
Function Select - ECG - Arrhythmias Menu
To select the ARRHYTHMIA MENU, press the <F3>-ARRH key from the ECG MENU:
ARRHYTHMIAS
SV PREM VNT1 VNT2
<F1> <F2> <F3> <F4>
>
eic028.eps
ARRHYTHMIAS
COND
<F1> <F2> <F3> <F4>
<
eic029.eps
Arrhythmias are divided into these five groups: supraventricular, premature, ventricular
rhythm 1, ventricular rhythm 2 and conduction.
Those that contain normal beats have an 80 BPM rate and unless otherwise stated, the PR
interval is 0.16 seconds.
When an arrhythmia contains one or more abnormal beats within a series of normal beats,
the abnormal beat is the second beat of the total series starting after one normal beat.
Supraventricular is a group of upper heart defect arrhythmias. To select the
supraventricular group, from the ARRHYTHMIAS MENU, press <F1>-SV for the
following three display pages of ten supraventricular waveform selections:
sv arrhythmias
nsr af1 af2 aflt
<F1> <F2> <F3> <F4>
>
eic030.eps
sv arrhythmias
sa mb80 mb120 pat
<F1> <F2> <F3> <F4>
> <
eic031.eps