Fluke Biomedical medSim 300B - Manual (Page 61)

Operation
Operating the medSim 300B
3
3-33
Follow the instructions for the step menu functions as presented earlier in this chapter.
To access the BP 3 SWAN-GANZ MENU, press <F3>-SWAN from the BP 3 MENU for
the following:
bp 3 swan-ganz:
start
<F1> <F2> <F3> <F4>
eic082.eps
The descriptions of the function selections and waveform simulations for the SWAN-
GANZ MENU are:
Selections Descriptions
start
Starts the simulated Swan-Ganz procedure.
ins Insert: advances to the next step.
rem Remove: returns to the beginning.
inf Inflate: inflates the balloon in the pulmonary artery and creates the
pulmonary artery wedge
def Deflate: deflates the pulmonary artery wedge and returns to the
pulmonary artery
atm Atmosphere.
cvp
Central venous pressure
rv Right ventricle
pa Pulmonary artery
paw Pulmonary artery wedge
1. Press <F1>-START to begin the simulated Swan-Ganz procedure. The following
menu is displayed:
bp 3 swan-ganz: atm->cvp
ins
<F1> <F2> <F3> <F4>
eic083.eps
2. To proceed from atmosphere to central venous pressure, press <F1>-INS:
bp 3 swan-ganz: cvp->rv
ins rem
<F1> <F2> <F3> <F4>
eic084.eps