Fluke Biomedical medSim 300B - Manual (Page 86)

medSim 300B
Operators Manual
3-58
2. Use the VIEW MENU to adjust the viewing angle of the display for the best
contrast. From the UTILITY MENU, select <F1>-VIEW for the following
display:
view angle
down up save
<F1> <F2> <F3> <F4>
eic146.eps
3. Press either <F1>-DOWN or <F2>-up repeatedly to change the viewing angle
and the contrast of the display.
4. Press <F3>-SAVE to save the desired viewing angle permanently in the
EEPROM.
Note
If not saved, the viewing angle returns to the previous setting the next time
the power is turned on.
5. Use the TIME MENU to select a time interval to automatically shut off the
medSim 300B following the last key pressed.
6. From the UTILITY MENU, choose <F2>-TIME:
auto power off time
off 0.5 1.0 2.0
<F1> <F2> <F3> <F4>
>
eic147.eps
auto power off time
4.0 8.0
<F1> <F2> <F3> <F4>
<
eic148.eps
7. Press a related function key to select a desired time interval (in hours) after which
the medSim 300B is to automatically shut off. Press <Fl>-OFF to disable this
mode.
The selected value is saved in the EEPROM.