Fluke Biomedical medSim 300B User Manual
Page 77
Operation
Operating the medSim 300B
3
3-49
Function Select - Sequences -Step-sequences - Sequence to Review Menu
To select the SEQUENCE TO REVIEW MENU, press <F4>-REVU from the STEP
SEQUENCES MENU and the following display appears:
SEQUENCE TO REVIEW
SEQ1
SEQ2
SEQ3
SEQ4
<F1>
<F2>
<F3>
<F4>
eic118.eps
This menu provides for a review of user step-sequences.
Note
If a selected sequence has not yet been programmed, an error beep sounds.
Upon selecting a sequence to review (<Fl>, <F2>, <F3>, or <F4>) the display, as
represented below, provides the following information:
S# ? ##:##.#
????
##.#
NEXT
RSET
<F1>
<F2>
<F3>
<F4>
eic119.eps
From the top line of the display:
S#
Is the sequence name: "S I", "S2", "S3", or "S4"
?
Is the end mode: "s" or "c" (stop or cycle)
##:##.#
Is the sequence run time
????
Is the segment name (abbreviated)
##.#
Is the segment run time
The second line of the display shows the selections as follows:
Selections Descriptions
NEXT
Steps through the segments
RSET
Reset goes back to the first segment