Function select - respiration menu – Fluke Biomedical medSim 300B User Manual
Page 54
medSim 300B
Operators Manual
3-26
To set the respiration rate for normal waveform:
1. Press <F2>-RATE from page 1 of the RESPIRATION MENU for the following
two pages of menu display:
respiration rate
2 0
3 0
4 0
1 5
<F1>
<F2>
<F3>
<F4>
>
eic059.eps
respiration rate
120
6 0
<F1>
<F2>
<F3>
<F4>
<
eic060.eps
2. Select the respiration rate in breaths per minute for a normal waveform by
pressing the corresponding function key.
To set respiration amplitude:
1. Press <F3>-OHMS from page 1 of the RESPIRATION MENU. The following
two pages of the RESPIRATION OHMS MENU are displayed:
respiration ohms
0.1
0.2
0.5
0.0
<F1>
<F2>
<F3>
<F4>
>
eic061.eps
respiration ohms
3.0
1.0
<F1>
<F2>
<F3>
<F4>
<
eic062.eps
2. Select respiration amplitude (impedance variation in ohms) by pressing the
corresponding function key.