Fluke Biomedical medSim 300B - Manual (Page 71)

Operation
Operating the medSim 300B
3
3-43
Selections Segments Run Times
setup (Monitor setup)
Blood pressure/artifact off
ECG BPM 80
Respiration rate 20
BP1 atmosphere
BP2 atmosphere
BP3 atmosphere
BP4 atmosphere Continuous
Stop
start (Monitor start)
ECG BPM 80
Respiration rate 20
BP1 artifact
BP2 pulmonary artery
BP3 central venous
pressure
BP3 left ventricle Continuous
Stop
Function Select – Sequences - Step-sequences Menu
Step-sequences, as opposed to autosequences, can be started and stopped manually. To
select the STEP-SEQUENCES MENU, press <F2>-STEP from the SEQUENCES
MENU:
STEP SEQUENCES
FIXD USER MAKE REVU
<F1> <F2> <F3> <F4>
eic106.eps
This menu provides:
• Three preprogrammed (also referred to as "fixed" or "preset") step-sequences that
are accessed by pressing <F1>-FIXD.
• Four user-programmable step-sequences that are accessed—only after being
programmed into the medSim 300B—by pressing <F2>-USER.
• User step-sequences programming that is accessed by pressing <F3>-MAKE.
• User step-sequences review that is accessed by pressing <F4>-REVU.