Teac GigaStudio 3 - Manual (Page 201)

200 201
Name Field
Click this field and type in a descriptive name for
the selected input channel strip.
Channel Output Selection
The last item at the bottom of each input channel
strip is the output display field. Click here to bring up
a menu where you can redirect the output of selected input channel strip.
Channel Output Menu (Normal mode)
With GigaStudio in its normal mode (not in Re-
Wire mode) the available outputs for each input
channel strip are dispersed as follows:
GSIF Hardware output pairs. The number of
outputs available is defined in the System Settings-
>Hardware preferences tab.
Channel Output Menu (ReWire mode)
When GigaStudio is running in ReWire mode the
available outputs are dispersed as follows:
ReWire output pairs. The number of outputs avail-
able is defined in the System Settings->ReWire Plugins
preferences tab under ReWire Configuration.
Group Input pairs. The number of groups is defined
in the System Settings->Mixer/Disk Engine prefer-
ences tab. Under Mixer Options define the number of
Mixer Groups.
There are no GSIF Hardware outputs available
while GigaStudio is running in ReWire mode.
Group Input pairs. The number of groups is defined in the System Settings->Mixer/
Disk Engine preferences tab. Under Mixer Options define the number of Mixer Groups.