Teac GigaStudio 3 - Manual (Page 56)

56 57
While the “Audition Mode” button is active, any instrument that is double-clicked
will be loaded to the selected port and channel. The previous instrument will be de-
tached, but remain loaded in memory until it is unloaded. In this way, it is easy to cycle
through a series of instruments at the keyboard until the you find the one you want.
By watching the Loaded
Instruments List you can re-
vert back to previously played
instruments for quick A-B com-
parisons as long as the instru-
ments are still loaded.
The list can become quite
large very soon, so it is a good
idea to monitor this list along
with the Status Bar Memory
indicator at the bottom of the
screen.
Once you have decided on
an instrument you can unload
the ones you are not using in
order to free up memory for
loading other instruments. To
do this, right-click on any in-
strument in the Loaded Instru-
ments List and select “Unload
Unmapped” to remove all in-
struments except for the ones
that are mapped to a port and
channel.
See Reference section for the QuickSound Loader for more details on loading/
unloading instruments.