Teac GigaStudio 3 - Manual (Page 87)

86 87
To successfully disconnect the ReWire connection from Cubase SX you must always
quit Gigastudio first.
How To ReWire GigaStudio 3.0 with Nuendo
This procedure is based on Nuendo version 1.5.2 or later for Windows XP.
1. If you have not used Nuendo yet, please be sure to run it at least once before pro-
ceeding. This is so that Nuendo can install its ReWire engine in your system.
2. Go to the Nuendo Devices menu and select Giga3.
3. Launch GigaStudio 3.0.
4. Activate the ReWire channels in the Nuendo ReWire menu. The ReWire channels
will become available as channel strips in the Nuendo VST Mixer. These channel
strips can have the following properties:
• ReWire channels show up on the far right hand side of the audio and MIDI channel
strips.
• ReWire channels can be any combination of mono and stereo.
• ReWire channels will function just like any other audio channel in the VST Mixer,
with the exception that ReWire channels have no ‘Input” buttons.
5. To take full advantage of the mixing features in Nuendo you will need to route the
different GigaStudio instruments directly to the DSP Station ReWire output mas-
ter channels. For example, if your GigaStudio performance contains eight different
instruments and you connect these to separate output masters in the DSP Station,
they will appear on separate ReWire channels in the Nuendo VST Mixer. You can
then use the mixer in Nuendo to adjust volume and pan, add effects and EQ - indi-
vidually for each GigaStudio instrument.
6. If you simply connect all your Giga instruments through the DSP Station mixer to
the stereo output pair on the Output Masters 1:2, all sounds will appear mixed on
a single ReWire stereo channel pair. This a perfectly acceptable option as there are
extensive mixing and processing capabilities in the GigaStudio, allowing you the
option of a pre-processed stereo mix. Note the manual assignment as the DSP sta-
tion always defaults to rewire outputs 1.2.
Gigastudio 3.0 is now in ReWire Slave mode, while Nuendo is the ReWire Master. You
can render the GigaStudio ReWire input in Nuendo as you would with other tracks, us-
ing the “Import to Pool” and “Import to Audio Track” options in a Nuendo project. (For
more application specific information see the recording section of the Nuendo manual).
To successfully disconnect the ReWire connection from Nuendo you must always
quit Gigastudio first.