Teac GigaStudio 3 - Manual (Page 258)

258 259
Title Bar description information
The title bar of the GigaPulse window shows the channel pair of the insert or aux
buss assignment and the instance of the interface that is being used. It is possible to
have as many instances of GigaPulse as your system resources will allow.
Close Window
Dismiss the interface window by clicking on the X in the upper right hand corner.
The GigaPulse will remain active while it is hidden form view. To remove the GigaPulse
completely, and free up your system resources for other tasks, select “Remove” from the
insert drop-down list in the Input, Group, or Aux Buss in the DSP Station.
Bypass button
Listen to the dry, unaffected signal, by clicking the bypass button. When the button is
active GigaPulse is bypassed.
A-B buttons
The A and B buttons are helpful for tweaking settings and making presets for your
saved GigaPulse banks. Use A as your original settings and switch to B to make adjust-
ments. Switch back to A to listen and compare your new B settings. These settings can
be adjusted and monitored in real time.
Top drop-down list
Click the bank/preset select button for a list of available banks and presets within
the current active bank. There is also a shortcut for adding the current active preset to
the bank.