Teac GigaStudio 3 - Manual (Page 226)

226 227
bring it closer. Damping allows the High Frequency decay time to be made shorter than
the overall decay time. This imitates the way various materials in a real room absorbs
the sound.
Decay:
This sets the length of the decay time of the reverb signal. This combined with the
room size allows for large variety of possible ambience characteristics. For example, you
could have a large room size but give it a smaller decay time to keep it from muddying
and blurring the mix. Or you can use a smaller room but give it a longer decay time
and anything in between.
Diffusion:
Diffusion controls the amount of space between the reverb reflections. Higher settings
of diffusion give you a smoother sounding ambience because the reflections are much
closer to each other. Lower settings can sound more grainy but can very appropriate
for certain instruments and effects.
MIDI Control:
Every single slider in the plug-in can be assigned its own discrete MIDI controller to au-
tomate it.
Click on the [drop-down] arrow of a parameter or right-click on a slider to bring up the
MIDI Control menu.
From the menu, choose to configure the MIDI
control or to Display the MIDI control settings.