Displaying software versions – Verilink 9000 Series (34-00271) Product Manual User Manual
Page 104
82
C
HAPTER
4: NMCS
Displaying
Software
Versions
This function returns the list of tasks loaded in the unit along with their version
and the available space to download more tasks.
1
Press Shift+ F10 to access the Network Controller Software Upgrade Menu.
Configure the following parameters as follows.
Configuration number:
as appropriate
Line Module:
1 in 9101, 9111, and 9211; 1 to 3 in the 6400;
1 to 8 in the 6800
Get Software Version: Y
2
Press F10. This sends a request for a software version. The following is displayed.
Task Type
Version
Revision
Operating System
6.00
09
Supervisory
6.00
05
Ethernet Driver
6.00
02
SNMP Protocol
6.00
08
Bridge
6.00
02
IP Protocol
6.00
02
UDP Protocol
6.00
01
RAM space left for download 1285264
Space left in Flash 1: 39356
Space left in Flash 2: 304616
The bytes and space vary depending on the firmware loaded in the unit.
✍