Verilink 9000 Series (34-00271) Product Manual - Manual (Page 45)

9101 Connections 23
Port 1 Port 1 is a DDS port with a data rate of 56
kbps. The form factor of the connector is an
RJ-48S. Table 2-4 shows the pinout.
Port 2 Port 2 is a DTE port. Its
interface is V.35.
Table 2-5 shows the
pinout of Port 2.
Table 2-4 Port 1 Pinout
Pin Signal
1 R (output to network)
2 T (output to network)
3, 4, 5, 6 not used
7 T1 (input from network)
8 R1 (input from network)
Table 2-5 Port 2 Pinout
Signal
RS-232C
Circuit
Pin
V.35
Circuit Pins
A/B
Shield Ground AA 1 FG 1
Transmit Data BA 2 SD 2/14
Receive Data BB 3 RD 3/16
Request to Send CA 4 RTS 4
Clear to Send CB 5 CTS 5
Data Set Ready CC 6 DSR 6
Signal Ground AB 7 SG 7
Data Carrier Detect CF 8 RLSD 8
Transmit Clock DB 15 SCT 15/12
Receive Clock DD 17 SCR 17/9
DTE Ready CD 20 DTR 20
External Clock DA 24 SCTE 24/11