Verilink 9000 Series (34-00271) Product Manual - Manual (Page 362)

340 C HAPTER 20: S IMPLE IP/IPX R OUTER C ONFIGURATION S CENARIO U SING NMCS S CREENS AND RFC-1490
Ethernet Driver
Configuration
TXPORT INTELLINET Configuration Program
Configuration 1000
Frame Relay / TXPORT Multidrop List Endpoint
Line Module [1 ] Port [2] Description
Copy Access List from Configuration [ ] Module [ ] Port [ ]
Address/ Alternate Default Options
DLCI Endpoint Endpoint Connect ABCDEFGHIJKLMNOP
0017 DLCI17 (NULL) NNNNYNNNNNNNNNNN
0018 DLCI18 (NULL) NNNNYNNNNNNNNNNN
0019 001 (NULL) NNNNNNNNNNNNNNNN
Figure 20-8 Add the Three Endpoints, Press F7, then Press F8, and choose
Port L Configuration.
TXPORT INTELLINET Configuration Program
Configuration 1000
Ethernet Driver parameters
Line Module [01] Port [6] Description [ ]
Copy Port Parameters from Configuration [ ] Module [ ] Port [ ]
LAN speed (MBPS) [ 10]
Physical Port selection [UTP]
Link test Enabled [Y]
Squelch threshold [N]
Figure 20-9 Verify Settings