Asynchronous host and terminal parameters – Verilink 9000 Series (34-00271) Product Manual User Manual
Page 424
402
C
HAPTER
A: C
ONSOLE
I
NTERFACE
Asynchronous Host and Terminal Parameters
(a)
Device Type: Host or Terminal (Terminal for terminal port and Host for host port)
(b)
Alternate Name: up to 17 ASCII characters, null string
(c)
Link Speed: AUTO, 30, 1200, 2400, 4800, 9600, 19200, 38400, 56000, or 64000 bps, (AUTO if the Device Type is Terminal)
(d)
Character Length: 7 or 8 bits
(e)
Parity: None, Even, or Odd
(f)
Link Interface: RS-232 Sync, RS-232 Async, TDI, V.35 Sync, or V.35 Async
(g)
Link Termination: DCE or DTE
(h)
Emulation (menu)
(a)
Host Emulation Type: Dumb Async, Unisys T-27, Adm3a, AddsVp, AddsVp2, VT52, VT1
VT200, TVI910, or WYSE 50
(b)
Terminal Emulation Type:Dumb Async, Unisys T-27, Adm3a, AddsVp, AddsVp2, VT52,
VT100, VT200, TVI910, or WYSE 50
(c)
User Field Character: one ASCII character, <
(d)
User Field Length: 0 to 1920, 20
(e)
Remove Field Spaces: Yes or No
(i)
Suppress Echo: Yes or No
(j)
Transparent Mode: Yes or No
(k)
RTS/CTS Control: Dynamic, Fixed On, or Floating
(l)
Drop DTR on DCD: Yes or No
(m) Flow Control:XON/XOFF; DTR Only; XON & DTR; CTS Only; XON & CTS; XON, DTR, & CTS; or No Flow
(n)
Link Active: DSR & DCD, DSR Only, or Don’t Care
(o)
End of Input: CR, CR/LF, Timeout, or User Defined (CR for terminal port; Timeout for host port)
(p)
End of Input Timer (X 10 ms)
(q)
End of Input in Data: Yes or No
(r)
End of Output Char: CR/LF, CR, LF, ETX, or None (CR/LF for terminal port; CR for host port)
(s)
Control Characters (menu)
(a)
BS:
0 x 08
(b)
CAN:
0 x 18
(c)
XON:
0 x 11
(d)
XOFF:
0 x 13
(e)
CR:
0 x 0D
(f)
LF:
0 x 0A
(g)
BEL:
0 x 07
(h)
HTAB:
0 x 09
(i)
DLE:
0 x 10
(j)
ESC:
0 x 1B
(t)
Activity Timer (min): 0 to 255 minutes
(u)
Address
(a)
Device Name: up to 17 ASCII characters, null string
(b)
Default Address: two ASCII characters, station address provided
(c)
Default Name: up to 17 ASCII characters, null string
(d)
Options:
Automatic Connection on Power On (Y or N) ?
Don’t Send Status Message (Y or N) ?
Reserved Channel (Y or N) ?
Sharable (Y or N) ?
Send CR on Input (Y or N) ?
Defaults are underlined
.