Verilink 9000 Series (34-00271) Product Manual - Manual (Page 92)

70 C HAPTER 4: NMCS
Flow Control
This parameter selects the method/methods of controlling the flow of data between
the terminal and the unit.
The selections are X (Xon/Xoff), D (DTR), C (CTS), and N (None). Selections
may be combined. An entry of XD initiates both Xon/Xoff and DTR flow control.
The default is XD.
Function Keys
ESC=Main Menu. Returns to the main menu.
F1=Help. Displays a help screen relative to the current field.
F5=Clear. Clears the current field and place the cursor at the left-most position.
F7=Redisplay. Redisplays the screen with the original data. Any data that was
changed on the current screen is lost.
F8=Jump. Goes immediately to the access menu.
F9=Previous. Moves one logical screen backwards.
F10=Next. Moves one logical screen forward.
F9 and F10 write the current screen's fields to disk. Any information that changed is
saved at this time. ✍