Verilink 9000 Series (34-00271) Product Manual - Manual (Page 189)

Legacy Terminal Options 167
B - Don’t Send
Status Message
It is possible to have the MultiPro unit initiate a message to a device. These
greeting messages are concerned with stations connecting to new hosts, hosts being
off-line, etc. If a device should not receive any of the defined messages, this option
should be turned on as shown in Figure 10-5. This prevents the MultiPro unit from
sending any of the user-defined messages to this device as illustrated in
Figure 10-4.
Since this is a device-level parameter, messages can be generated to some devices
on a port and not to others. Obviously, messages should not be generated to
printers. Messages should also not be generated to poll/select devices that are using
transparent transmission numbers since the MultiPro would not know what the
current sequence number was.
X
DOWNLOAD CONFIG
MODE BACKUP NET ALARM POWER
PRISM 9111 T R A N S P O R T
®
Processor
Host offline message to address 01
Terminal 01
kjzxkjKCJKskkj sacofiasf csaoifjn oiaasou woasoa soasoiun sauncsaus scx
kKCJKskkj sacofiasf csaoifjn oiaasou woasoa soasoiun sauncsaus scx
kjzxkjKCJKskkj sacofiasf csaoifjn oiaasou
kjzxkjKCJKskkj sacofiasf csaoifjn oiaasou woasoa soasoiun sauncsaus scx
kjzxkjKCJKskkj sacofiasf csaoifjn oiaasou
Dot-matrix printer
address 02
Figure 10-4 Typical Application for Don’t Send Status Message Option
TXPORT INTELLINET Configuration Program
Configuration 1000
Terminal Port Station Parameters
Line Module [1 ] Port [1] Description
Copy Stations from Configuration [ ] Module [ ] Port [ ]
Address Network Default Options XN #
Term Conn Station Name Host ABCDEFGHIJKLMNOP Type
01 TERM01 HOSTA YNNNNNNNNNNNNNNN N
02 PRINTER02 HOSTA YYNNNNNNNNNNNNNN N
F1=Hlp F2=Mod F3=Add F4=List F5=Clr F6=DelAll F7=Copy F8=Jmp F9=Prev F10=Next
Figure 10-5 Terminal Port Station Parameters Screen