Verilink 9000 Series (34-00271) Product Manual - Manual (Page 345)

NMCS Screens 323
Frame Type
This must be configured for a LAN circuit. The choices are ETHE, 802.2, and
802.3. By default, the Frame Type used is 802.2 which is the standard Novell
encapsulation.
Circuit Name
The circuit name will be used to receive a logical connection from a remote IPX
router. It is required only for a Proprietary encapsulation circuit that will receive a
logical connection from a remote IPX router.
Circuit Connect Name
The connect name will be used to establish a connection with a remote IPX router.
It is required if the encapsulation is Proprietary. It must be configured only on one
side of the IPX router to IPX router connection.
DLCI Number
This is required if the encapsulation is 1490. As written, this corresponds to the
DLCI number of the circuit defined.
Enable IPXWAN2
This enables IPXWAN2 negotiation when connecting to another device as a
TXPORT router or any other brand of router supporting IPXWAN. The default
value is No.