Verilink 9000 Series (34-00271) Product Manual - Manual (Page 191)

Legacy Terminal Options 169
Figure 10-8 and Figure 10-9 depict how the printer address is defined on the host
ports as well as the terminal port. Figure 10-8 shows the host port entry for both
host ports. Figure 10-9 is for the terminal port. Note that option B (don’t send
status message) is turned on to make sure erroneous messages are not sent to the
printer.
TXPORT INTELLINET Configuration Program
Configuration 1000
Host Port Station Parameters
Line Module [1 ] Port [1] Description
Host Group Auto Connect Options XN #
Address Address Station Name ABCDEFGHIJKLMNOP Type
P1 REMOTE-PRINTER NNYNNNNNNNNNNNNN N
F1=Hlp F2=Mod F3=Add F4=List F5=Clr F6=DelAll F7=Copy F8=Jmp F9=Prev F10=Next
Figure 10-8 Host Port Station Parameters Screen
TXPORT INTELLINET Configuration Program
Configuration 1000
Terminal Port Station Parameters
Line Module [1 ] Port [1] Description
Copy Stations from Configuration [ ] Module [ ] Port [ ]
Address Network Default Options XN #
Term Conn Station Name Host ABCDEFGHIJKLMNOP Type
P1 REMOTE-PRINTER NYNYNNNNNNNNNNNN N
F1=Hlp F2=Mod F3=Add F4=List F5=Clr F6=DelAll F7=Copy F8=Jmp F9=Prev F10=Next
Figure 10-9 Terminal Port Station Parameters Screen