Verilink 9000 Series (34-00271) Product Manual - Manual (Page 77)

Configuration / Operation 55
(P) - PORT STATISTICS - The information returned for this request includes
overall port statistics on average response time, messages transmitted and received,
errors transmitted and received, and timeouts. More protocol-specific information
may be displayed depending on the protocol of the port. The line module and port
fields must be filled in for this request.
(S) - STATION STATISTICS - A station statistic request return the same
information as the Port Statistic, however, it is only for the specific, requested
station. The line module, port, and station name fields must be filled in for this
request.
(R) - RESET PORT STATISTICS - This command resets (zeros out) the statistic
counters for the specified port. The line module and port fields must be filled in for
this request.
(C) - RESET STATION STATISTICS - This command resets (zeros out) the
statistics for an individual station. The line module, port, and station name fields
must be filled in for this request.
LAN Statistics.
(B) - Bridge - The bridge statistics contain information pertaining to the number of
filtered, forwarded, and broadcasted frames. It also contains information
concerning the number of frames with a broadcast address as well as topology
changes and lookup table overflows.
(A) - Port - This statistic request contains the same information as B with the
exception of topology changes and look up table overflows.
(D) - Reset Bridge Statistics - This command zeros out the bridge statistics.
(E) - Reset Port Statistics - This command zeros out the port statistics.
Line Module
This field indicates which line module the request is sent to. For more information
concerning this parameter, see page 62.
Port
The port field is used to indicate the port number on the line module the request
should be sent to.
Station Name
This field is used to indicate the name of the desired station when performing a
Station Status request.
Function Keys
ESC=MAIN. Returns to the main menu.
F1=Help. Displays a help screen relative to the current field.