Verilink 9000 Series (34-00271) Product Manual - Manual (Page 383)

Frame Relay Configuration (9111 Unit) 361
TXPORT INTELLINET Configuration Program
Configuration 1000
Frame Relay Port Parameters - Level 1 and Level 2
Line Module [01] Port [2] Description [ ]
Copy Port Parameters from Configuration [ ] Module [ ] Port [ ]
Level 1 Level 2
Baud Rate [ 128K] Device (Network/FRAD) [F]
Interface (R/V) (9211 only) [R] N1 Counter (1 - 255) [ 10]
Termination (DCE/DTE) (9211 only) [DTE] N2 Counter (1 - 255) [ 5]
RTS/CTS Control (O/D/F) [0] N3 Counter (1 - 255) [ 5]
Active if DSR/DCD (B/S/N) [5] T1 Timer (sec) (1 - 255) [ 10]
T2 Timer (sec) (1 - 255) [ 15]
Recovery Counter (1 - 255) [ 3]
LMI Standard (CCITT/ANSI/TXPORT)[ANSI]
Figure 21-6 Configure Level 2 Parameters and Level 3 Parameters
TXPORT INTELLINET Configuration Program
Configuration 1000
Frame Relay Port Parameters - Level 3
Line Module [01] Port [2] Description [ ]
Packet Size [ 256] VC Modulo (8/128) [ 8]
Restart Request Timer (sec) [ 15] VC Window [ 7]
Call Request Timer (sec) [ 15] Number of VC’s [ 64]
Reset Request Timer (sec) [ 15] Clear Request Timer (sec) [ 15]
Recovery Counter [ 3] Data ACK Timeout (sec) [ 60]
Postpone Timer (sec) [ 1] DTR Dial Backup [N]
Figure 21-7 Press F8 and choose Port 02 Address List