Verilink 9000 Series (34-00271) Product Manual User Manual
Page 373
Router IP/IPX Configuration (9211 Unit)
351
Figure 20-30 Enter Circuit Number 1, Verify Settings, and Press F10
TXPORT INTELLINET Configuration Program
Configuration
Add IPX Circuit
Line Module
Circuit number [001] Enable this circuit [Y]
IPX Network Address [55555555] Maximum Transmit Unit Size [ 576]
Interface speed (bps) [10000000] Propagation Delay (ms) [ 2]
Enable RIP/SAP [ ] Enable NLSP [ ]
Filter Type 20 Packet [N]
Type of Circuit (WAN/LAN) [LAN] Encapsulation type (WAN) [1490]
Frame Type (LAN) [802.2] Circuit name [ ]
Circ. connect name [ ]
DLCI Number (WAN) [ ]
Enable IPXWAN2 (WAN) [N]
RIP/SAP Parameters
RIP Periodic Interval (s) [ 60] RIP Age Multiplier [ 3]
Maximum RIP Packet Size [ 512] SAP Periodic Interval (s) [ 60]
SAP Age Multiplier [ 3] Maximum SAP Packet Size [ 512]
Figure 20-31 Enter Circuit Number 2, Verify Settings, and Press F7, and Press
F10 Twice to Return to the Main IPX Router Screen
TXPORT INTELLINET Configuration Program
Configuration
Add IPX Circuit
Line Module
Circuit number [002] Enable this circuit [Y]
IPX Network Address [44444444] Maximum Transmit Unit Size [ 576]
Interface speed (bps) [ 128000] Propagation Delay (ms) [ 10]
Enable RIP/SAP [Y] Enable NLSP [Y]
Filter Type 20 Packet [Y]
Type of Circuit (WAN/LAN) [WAN] Encapsulation type (WAN) [1490]
Frame Type (LAN) [ ] Circuit name [ ]
Circ. connect name [ ]
DLCI Number (WAN) [ 17]
Enable IPXWAN2 (WAN) [N]
RIP/SAP Parameters
RIP Periodic Interval (s) [ 60] RIP Age Multiplier [ 3]
Maximum RIP Packet Size [ 512] SAP Periodic Interval (s) [ 60]
SAP Age Multiplier [ 3] Maximum SAP Packet Size [ 512]