Verilink 9000 Series (34-00271) Product Manual - Manual (Page 31)

Specifications 9
9111: Port 1: DDS; 56 or 64 kbps; RJ-48S, female or
T1; 1.054 Mbps; RJ-48S, female
Port 2: DTE; RS-232 or V.35 (depending on a jumper
on the main PCB), 1.2 to 38.4 kbps w/character-oriented
protocols and 2.4 kbps to 2.048 Mbps w/bit-oriented
protocols; DB-25, female
Port 3 and Port 4: DCE, RS-232, 1.2 to 38.4 kbps
w/character-oriented protocols and 2.4 kbps to 128 kbps
w/bit-oriented protocols; DB-25, female
Optional Ethernet interface with 10 Base-T on an RJ-48,
female
Optional Port 5 and Port 6: DCE or DTE (depending on
jumpers on the option card), RS-232, 1.2 to 38.4 kbps
w/character-oriented protocols and 2.4 kbps to 128 kbps
w/bit-oriented protocols; DB-25, female
9211: Ports 1- 4: software-configurable DCE or DTE; RS-232, TDI,
or V.35, 1.2 to 38.4 kbps w/character-oriented protocols and
2.4 kbps to 2.048 Mbps w/bit-oriented protocols;
DB-25, female
Optional Ethernet interface with 10 Base-T on an RJ-48,
female and AUI on a DB-15, female
Optional TDI module to support Unisys TDI interface
at any ports
9111 Port 1
DDS
Option
Network Interface.
Line Rate: 56 and 64 kbps
Line Code: AMI
Line Impedance: Balanced 135
Ω
Input Signal: +1 to -40 dB (ALBO)
Output Signal: 3.0 V (±15%) base-peak into 135
Ω
Line Protection: 1000 V lightning, input and output
Industry Standards.
FCC Compliance: Part 15 Subpart B, Class A, Part 68
U.S. Safety: UL 1950, 3
rd
Edition
Canadian Safety: CSA C22.2 No. 950-95, Issue 8
Industry Canada: CS-03 Issue 8
9111 T1
Port 1
Option
Network Interface.
Line Rate: 1.544 Mbps (± 50 bps)
Line Framing: D4 or ESF
Line Code: AMI or B8ZS