Yaskawa E7L Drive Bypass - Manual (Page 17)

Physical Installation 1 - 5
Bypass Unit Enclosures
All Bypass units are intended for non-hazardous locations. Various enclosure types are provided to protect against the applica-
tion environmental conditions:
Nema Type 1 Enclosures
These are constructed for indoor use to provide a degree of protection against incidental contact with enclosed electrical equip-
ment and falling dust or dirt.
NEMA Type 12 FVFF Enclosures
NEMA provides for both non-ventilated and ventilated NEMA 12 enclosures. When ventilated, a suffix to the type number
defines the ventilation method. A NEMA 12 FVFF enclosure has Forced Ventilation with inlet air Filter and outlet air Filter.
The internal pressure is positive with respect to the ambient pressure. UL does not recognize NEMA 12 ventilated enclosures,
therefore, these enclosures are designated NEMA 1 for UL purposes.
Table 1.4 480V Enclosure Data
Input
Volts
HP 1
Drive
Model
CIMR-
Bypass 2
Model
Number
NEC
FLA
OL
110%
1 min
Heat 3
Loss
Watts
Enclosure Dimensions 4
NEMA 1 & NEMA 12 -FVFF
H W D
inches
Weight 5
of
Assembly
Electrical
Schematic
480
0.5 42P21 E7L_B001 1.1 1.2 57
29.48 19.06 13.66
Dimension Drawing 6
S-5537
115 lbs
E7L-00
0.75 42P21 E7L_B001 1.6 1.8 57
1 42P21 E7L_B002 2.1 2.3 62
2 42P21 E7L_B003 3.4 3.7 89
3 42P21 E7L_B004 4.8 5.3 121
5 43P71 E7L_B007 7.6 8.4 155
7.5 45P51 E7L_B011 11.0 12.1 217
10 47P51 E7L_B014 14.0 15.4 318
127 lbs
15 40091 E7L_B021 21.0 23.1 404
20 40111 E7L_B027 27.0 29.7 408
142 lbs 25 40151 E7L_B034 34.0 37.4 485
30 40181 E7L_B040 40.0 44.0 618
40 40241 E7L_B052 52.0 57.2 1040
40.48 25.63 14.66
Dimension Drawing 6
S-5539
203 lbs
50 40301 E7L_B065 65.0 71.5 1045
232 lbs
60 40371 E7L_B077 77.0 84.7 1197
Note 1: Horsepower rating is based on a standard NEMA B 4-pole motor.
Note 2: The underscore position in these model numbers codes for the enclosure type: V = NEMA1, B = NEMA12 FVFF.
Note 3: Heat loss is the amount of heat dissipated by the drive at full load with all standard options available inside the enclosure. Drive heat sink losses are
included in the heat loss data.
Note 4: Height dimension (H) excludes the mounting screw tabs. Depth dimension (D) excludes the disconnect handle.
Note 5: This data represents the total weight with all possible standard options. Weight could be less depending on the options specified.
Note 6: All standard options are available in this size enclosure.