Yaskawa E7L Drive Bypass - Manual (Page 69)

Control Panel 3 - 13
- DRIVE - Operation Menu
This menu is used for setting a speed command or monitoring values such as output frequency and output current. It is also
used for displaying the fault history and the fault traces. The Drive may be limited to this menu in order to accept a run
command, see parameter b1-08 in Chapter 5 and Table 5.1.
Example Operations
Key operations in drive menu are shown in the following figure.
Fig 3.4 Operations in Drive Menu
Menu Selection Display Monitor Constant Display Deleted Monitor Constant Monitor Display
Drive Menu Frequency reference
Output frequency
Output current
Monitor setting for o1-01
Status Monitor
Error Trace
Fault History
Frequency reference setting/
display unit 01-03
Frequency reference
Fan operating time
Current error
Operating time at error
1st previous error
Operating time at 4th
previous error
Power On
Display