Rainbow Electronics AT91CAP9S250A - Manual (Page 817)

817
6264A–CAP–21-May-07
AT91CAP9S500A/AT91CAP9S250A
42.5.8 Interrupt Status Register
Register Name: EMAC_ISR
Access Type: Read/Write
• MFD: Management Frame Done
The PHY maintenance register has completed its operation. Cleared on read.
• RCOMP: Receive Complete
A frame has been stored in memory. Cleared on read.
• RXUBR: Receive Used Bit Read
Set when a receive buffer descriptor is read with its used bit set. Cleared on read.
• TXUBR: Transmit Used Bit Read
Set when a transmit buffer descriptor is read with its used bit set. Cleared on read.
• TUND: Ethernet Transmit Buffer Underrun
The transmit DMA did not fetch frame data in time for it to be transmitted or hresp returned not OK. Also set if a used bit
is read mid-frame or when a new transmit queue pointer is written. Cleared on read.
• RLE: Retry Limit Exceeded
Cleared on read.
• TXERR: Transmit Error
Transmit buffers exhausted in mid-frame - transmit error. Cleared on read.
• TCOMP: Transmit Complete
Set when a frame has been transmitted. Cleared on read.
• ROVR: Receive Overrun
Set when the receive overrun status bit gets set. Cleared on read.
• HRESP: Hresp not OK
Set when the DMA block sees a bus error . Cleared on read.
• PFR: Pause Frame Received
Indicates a valid pause has been received. Cleared on a read.
• PTZ: Pause Time Zero
Set when the pause time register, 0x38 decrements to zero. Cleared on a read.
31 30 29 28 27 26 25 24
– – – – – – – –
23 22 21 20 19 18 17 16
– – – – – – – –
15 14 13 12 11 10 9 8
– – PTZ PFR HRESP ROVR – –
7 6 5 4 3 2 1 0
TCOMP TXERR RLE TUND TXUBR RXUBR RCOMP MFD